ULTRA Bow-Pocket Anchor

Fine front wings penetrate the seabed quickly.
Rear wings let the anchor bury deeper without creating unnecessary resistance.
Operates smoothly without jamming.
Available in Standard and Compact versions, with Balanced and Unbalanced options.
Handmade for durable and safe use.
Covered by a 10-year warranty.

Boat Type

Boat Weight (Tons)

Boat Length (Meters)

This is the most suitable ULTRA Anchor model based on the measurements you entered.

For anchors heavier than 500 kg, selection according to Lloyd calculations is more appropriate. The values here are provided only for preliminary selection.
If it will be used in side hawse pipes, it should be weighted toward the balanced type.
If it will be used on the stem, it should be weighted toward the unbalanced type.
This table applies to all Ultra Pocket Anchors, both Standard and Compact.

Properly selected Ultra Pocket Anchors are covered by our lifetime warranty against issues arising from manufacturing or normal use.

A properly selected ULTRA Pocket Anchor is strong enough to withstand even extreme natural conditions.
However, every material has a strength limit. If it gets stuck and is forced excessively with very high engine power, it may deform.
In such cases, appropriate recovery methods should be attempted instead of applying excessive force.

After years of research and design work, we are ready to reshape the anchoring world once again with the ULTRA Bow-Pocket Anchor.

Why does the ULTRA Bow-Pocket Anchor work better than other bow-pocket anchors?

Penetration into the seabed must begin with effective scratching. Because of the angle of the rear wings, seabed resistance loads the tips of the front wings and initiates that necessary first bite.
Because no casting or thick plate is used in its construction, the tips of the front wings are thinner and therefore penetrate the seabed more easily.
It features front wings and claws that offer a larger contact area with the seabed and therefore stronger holding power.
The angled shank surface slices through the seabed without creating unnecessary resistance, improving the anchor's ability to bury itself.
The rear wings stand at an angle that does not create drag and allows seabed material to flow. This means the ULTRA Bow-Pocket Anchor buries deeper as load increases, providing secure anchoring.
The special central hinge is an original mechanism that increases the anchor's effectiveness, offers little resistance to setting, and remains self-cleaning so it continues to work without jamming over time.

What sizes is it available in?

ULTRA Bow-Pocket Anchors are produced in sizes from 21 kg / 46 lbs up to 1500 kg / 3300 lbs. They are available in Standard and Compact versions and can be manufactured as Balanced or Unbalanced according to the needs of the vessel. Thanks to the hollow shank, it is also possible to produce a heavier anchor of the same size without negatively affecting balance.
Like all our products, the ULTRA Bow-Pocket Anchor is designed in Turkey and handmade from the highest-quality European stainless steels, including 316L and 318LN. It is polished to perfection to match its flawless performance with a flawless appearance.
Because it can be produced heavier than standard, it is also an excellent solution for boats with a bow pocket that is too small or otherwise inadequate.